The power supply is a bit much for this scale but I think I can fine tune the electrodes to compensate and get a good ladder... and I have to find a lug lid glass jar that will screw in. This would either get you an a in science class... or expelled... ?? More here: https://bravolaserworks.com/the-pocket-jacobs-ladder/
The Pocket Jacob's Ladder
FIND THE GUIDE HERE: https://bravolaserworks.com/meshstastic-off-grid-com-systems-guide/
Meshstastic Off-Grid Com Systems Guide Intro
I saw a thick aluminum business card cut into a razor blade on the interwebs. thought it was neat so i chose a random barber shop in the Boro that I thought would fit that design. whatcha think? (I hope they don't mind that I'm plugging them without checking with them first... my son and I get cuts there sometimes and its a great place) More here: https://bravolaserworks.com/shop/promotional-items/limited-edition-black-anodized-business-cards/
Bravo Laserworks Limited Edition Cut and Engraved Razor Blade Business Card
We got our own full length song for use with video background music, music on hold, and we can pull jingles and sound bites from it all day long. The video generation is primitive, we are confident a v2.0 will emerge at some point :)
Bravo Laserworks Anthem Video v1.0
https://bravolaserworks.com/taking-a-hacksaw-to-my-aurora-8v1/ First Full Run - 10 cards
Modifying The Aurora For Better Linear Table Fitment & Utilization Part 4
https://bravolaserworks.com/taking-a-hacksaw-to-my-aurora-8v1/ Okay, so I've got the guides on. I've got 10 cards loaded. I'm using uh batch repeat marking actually in LightBurn. So basically it'll allow me to load 10 cards on here. I could load up to 16 the way I have it, if I configured a little bit differently. I'm just going to do 10 at a time. So now I can let it do 10 cards at once automatically and not have to babysit the machine. So finish this one and move to the next one and go all the way to the end. Pretty cool. More to follow.
Modifying The Aurora For Better Linear Table Fitment & Utilization Part 3
https://bravolaserworks.com/taking-a-hacksaw-to-my-aurora-8v1/ Okay, so I cut the sides out of the Aurora and I cut some rudimentary guides out of some stuff I got from Houston acrylic. Ice blue mirror. It's beautiful and it looks pretty on my linear table and it stinks to high heaven when you cut it. It's terrible. My daughter had some furniture with wobbly legs and we discovered that they had these little feet them so I ordered a bunch on Amazon and gave her what she needed and kept the rest. And lo and behold, they're perfect to hold my guides in place on here. They're low profile. I can tighten them up with a quarter or a screwdriver back edge of a knife or whatnot. Just thought that was cool. I'll keep you posted. More to follow.
Modifying The Aurora For Better Linear Table Fitment & Utilization Part 2
https://bravolaserworks.com/taking-a-hacksaw-to-my-aurora-8v1 So I'm burning the midnight oil and burning up a few hacksaw blades and cutting up the Aurora a little bit to give a little more clearance. This V1 housing had this and I made a linear table for the V2 and it works on this one, but it sits too far forward. So I'm making that so I can slide it back. the full use of the workspace.
Modifying The Aurora For Better Linear Table Fitment & Utilization Part 1
https://bravolaserworks.com
I'm gonna learn me some fusion360!
Load More... Subscribe